Napco Security Technologies GEM-RP3DGTL Instrukcja Użytkownika Strona 27
- Strona / 32
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
27
GLOSSARY
Manager's Mode - In a partitioned
system, a low-security operating mode
that allows arming by area.
Panic Buttons - Blue buttons on the
keypad (G and 7, 8 or
9). If enabled, pressing G to-
gether with 7, 8 or 9 will
alert the central station of a fire, auxil-
iary, or police emergency.
Partitioned System - A system that
has been subdivided into two or more
(up to eight) independent subsystems
(areas).
Pre-Alarm Warning. - A keypad
sounder alert of an impending alarm.
This option is programmable by zone
for the same duration as that pro-
grammed for Abort Delay (see Abort
Delay).
Report - A transmission to a central
station notifying of a change in the
status of the system (alarm, trouble,
low battery, etc.).
RF Low Battery - (Wireless sys
tems only) Weak transmitter bat-
tery.
RF Check In - (Wireless systems
only) Periodic test report from trans-
mitter (if a report is not received on
time, a supervisory-failure system
trouble will result).
Ringback - A beep after arming
verifying the central-station's receipt
of a closing report.
Service Code - A code intended
for temporary use.
Sounder - A local warning device
at each keypad to alert that (a) entry
delay has started; (b) an attempt
was made to arm with a zone in
trouble; (c) a Day-Zone condition
exists (see Zones: Day Zone); (d)
10 seconds exit time remaining; (e)
invalid code entered; or (f) central
station acknowledged arming (see
Ringback).
System Trouble - A problem (low
battery, power failure, etc.) detected
in the system.
Trouble - A zone fault; an open
door, window, or other problem that
may prevent arming.
User Code - Your personalized
code for arming and disarming the
system. It may contain up to six digits.
Zones - Independent circuits that
protect specific areas of the premises:
• Auto-Bypass Zone: A zone that
will be automatically bypassed
from the protection system if it is
in trouble (faulty) when the sys-
tem is armed.
• Burglary Zone: Detects intru-
sion.
• Day Zone: A zone that will
cause a visual and audible indica-
tion at the keypad if it is in trouble
while disarmed.
GEM-RP3DGTL.pub
page 27
Wednesday, August 18, 1999 14:03
- ENT A1ENT A1 1
- INTRODUCTION 2
- JBUTTON 3
- Jto button or 5
- Area Arming (Optional) 7
- Bypassing Interior Zones 8
- Instant Protection 8
- Alarm Indication 10
- Jbutton 11
- FIRE PROTECTION 12
- GEM-RP3DGTL.pub 13
- Floorplan 14
- KEYPAD FUNCTIONS 16
- Communicator Features 21
- ADVANCED FEATURES 22
- Exit-Delay Restart 23
- PROGRAMMING (OPTIONAL) 24
- GLOSSARY 26
- SYSTEM TROUBLE ERROR CODES 29
- NAPCO LIMITED WARRANTY 32
Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Napco Security Technologies GEM-RP3DGTL
(16 strony)Interlogix SuperBus 2000 2X16 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Sicherheit Interlogix SuperBus 2000 2X16.
Wir stellen 1 PDF-Handbücher Interlogix SuperBus 2000 2X16 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Komentarze do niniejszej Instrukcji